Attic is a perfect place. It helps hot and cold air go in and out. It makes your home energy efficient, if it is properly insulated. If you add insulation in your attic, it will reduce your heating and cooling bills. Attic can be insulated in many ways.
You have to make your home energy efficient. Your energy bill can be reduced by twenty five per cent every month. You do not have to hire a professional. You can do attic improvements yourself.
You must first look at the type of insulation you need to install attic. You have to think about R-value. The R-value can be defined as the ability of insulation to resist heat flow. If the value of R-value is high, you will have powerful insulation.
The thickness of insulation material varies. Some insulation averages are R-3, and the other is R-8 per inch. Insulation reduces R-value with time, and, its ability to insulate decreases.
Attic insulation can be replaced or improved in different ways. If you have little or old insulation, you must replace it. If your energy bills are high, you must consider insulation. Check the moisture problems before starting insulation; as if you add insulation in moisture, things can become worst.
Insulation traps moisture. This leads to growth of mildew and mould. This spreads later. When water and moisture mix in the attic, it causes stains. Seal all leaks before putting insulation. It reduces heating bills.
You should install insulation sheets and bats. If the spacing is not even, insulation sheets are not easy to install. Apply second layer of insulation blanket over the first. This will seal the cracks. It also reduces the heat loss. Another insulation is called ‘lose fill insulation’. It is used to fill uneven spaces. Its coverage is more than bats. This insulation is blown from a machine. It can also be poured by hand, or bought in a bag. You can get machines on rent from rental stores. These machines blow the insulation.
You must take precaution when you use a blowing machine. Do carefully set the settings. You must not use too much insulation. If the insulation is too thick, it will not insulate attic properly. You should use wood shavings. They were used commonly during the early years. Now these are not used so much. This insulation can be heavy for the inside of attics. This can lead to the growth of fungus.
Cellulose insulation is made of ground wood or paper. This insulation is fire resistant. Fiberglass insulation is made of molten glass strands.
Insulation of attic is very necessary. Extreme caution should be taken to install it. Wear a protective gear. It is the best solution. Try to protect your hands and eyes with great care. Insulation irritates eyes, nose, and throat.
Insulation acts as a protection cover for your home. It last long. You become contented in the long run.
|