To locate a swimming pool leak is the most important concern of all swimming pool owners. Once you have opened your pool for the year, you can easily notice the leak by the water gushing out. However, it is difficult to tell where the leak has come from.
For this, first of all you need to confirm that it is a leakage and nothing else. Sometimes, the water loss is due to other reasons also. These could be evaporation or because of many people diving into the pool. Therefore, before going any further, you need to confirm that it is a leakage.
Once you are sure that it is a leakage, you have to find the cause. It could be plumbing leaks or shell leaks.
Water can also be lost due to evaporation. It is the most common cause of water loss from the pool. This can be seen especially in the summers. You can test this by putting water in one container on the same level and keep it near the pool. Leave it for a few days. Then, check for any difference in the water levels of pool and container. If the water level is lower in the pool, it means there is a leakage.
Now you have to find the spot of leakage. Firstly, start searching for the leakage near the pump and the filter. Mostly, the leakage occurs there. If you find water in these pumps and the filters, you have found the spot. Sometimes, leakage is also reported in the connection of the pipes.
However, if the pipes are in good condition, the shell of the pool should be checked. In the above ground pools, the leakage is generally due to holes. Just find out the hole and repair it.
The problem is more complicated with the in ground pools. Here, you also need to check the surrounding areas of the pool to find where the leakage is.
If you fail to find the source of leakage, you can take help of a professional. These professionals can solve your problem. They are aware of all the complications that might occur during the repair process.
After the leakage is spotted, it is wise to hire a professional to get it fixed. This is especially required with the in ground pools.
|