You hate the old paneling in home. It is costly to replace it. You cannot live with ugly wood paneling. It is very bad. It can depress you. You are prepared to sell the house because of it. But, do not worry as you are not alone with ugly wood paneling. In fact, many people live with it. You can do some repairs. By this you will get rid of ugly wall paneling.
You should follow these steps.
Painting and paneling—You have to remember an important rule. You cannot put paint on the paneling, and expect a professional look. It is difficult. The paint will run. The paneling will show as if it is absorbing paint. This will create yellow steaks. To get rid of ugly wood paneling, you must prepare the surface. Wood cleaner helps to degrease the muck on the paneling. First, apply the degreasing solution on the paneling. After this, you should use the gloss remover. Do not put the gloss remover over large areas. You should rub the area in the direction of wood grain. Take care to rub smaller sections. Let it adjust for half an hour. Now, apply the primer.
Do not remove the gloss remover. Now, put primer over frame areas and base boards. If the wood paneling is showing with first coat, let it become dry. Now, make a second coat on it. If you do not do this, your energy will become waste. Apply gross remover on smaller sections till the work is done. It will dry within one night. Remove excess gloss remover with putty knife. After this, do first coat. Wait till it dries. Now it dries. Your work is done.
Painting wallpaper—You can find this thing in a wallpaper store. You can feel a painted wall. You can choose the color you want. The bad looking wood paneling is now gone. Some colors will give a 3D effect. You can add these colors. You should first clean with a good degreaser. Now, let it dry. Now, fill each grove with caulk. This will remove the paneling ridges. Clean excess caulk with putty knife, and dump it.
Glazing and paneling—Glazing gives a good shine. Clean paneling with degreaser. Now, paint it with your favorite color. Wait for one night, and let it dry. Now, nix satiny top color with glaze in correct proportion. Follow the instructions thoroughly.
Ugly wood paneling is a menace. It has to be removed for good looks of the house. Since experts can do this job easily, one must consult them.
|